Mini Ticket Printers | Micro Ticket Printers | Kiosk Printers | Speciality Ticket Printers | Lemur
We
are excited to introduce our ENERGY STAR qualified, Lemur series of
printers this fall. The new printers are smaller, lighter and
less expensive than their predecessors while meeting or exceeding all
of our specifications. All Lemurs come standard with USB,
parallel and Serial (RJ12 connector) interfaces. Ethernet,
Bluetooth and WiFi are available as options. These printers are
well-suited for ticket, wristband and label applications. The
Lemur-2 and Lemur-2K provide two different ticket paths allowing for
the use of tickets and wristbands in the same printer.
DESKTOP PRINTERS (Lemur and Lemur-2 can be factory configured for vertical operation)
Lemur Size: 7.7 H x 6.5 W x 8.25 L
|
 |
 |
 |
Lemur-S Size: 11.3 H x 9.0 W x 14.5 L
|
 |
 |
 |
Lemur-2 Size: 7.7 H x 12.9 W x 8.25 L
|
 |
 |
 |
|
Lemur-FSP (flight strip) Size: 7.7 H x 6.5 W x 8.25 L
|
 |
 |
The
Lemur-FSP has been carefully designed to operate in the demanding
air traffic control environment. A specially designed platen
provides FSP compatible character spacing. (NOTE: The Lemur-FSP uses a 3.25" wide print head.) |
Lemur-M (magnetics) Size: 9.65 H x 7.4 W x 11.5 L
|
 |
 |
|
NOTE: Some of the above pictures are shown with cutters, displays and other options that are not present in the base models. Height dimensions include .30 for the rubber feet mounted to the bottom of the printer.
KIOSK PRINTERS
Lemur-K Size: 7.35 H x 6.5 W x 8.25 L
|
 |
 |
The
Lemur-K is the perfect kiosk printer for high speed, high volume ticketing. |
Lemur-2K Size: 7.4 H x 12.9 W x 8.25 L
|
 |
 |
 |
Lemur-MK (magnetics) Size: 9.3 H x 7.4 W x 11.5 L
|
 |
 |
The
Lemur-MK is the perfect kiosk printer for encoding on both Hi-Co and Lo-Co magnetic tickets. |
NOTE: Some of the above pictures are shown with cutters, displays and other options that are not present in the base models.
Lemurs are divided into four basic models – Lemur, Lemur-S, Lemur-2 and Lemur-M. Most options are available on any model. All
printers (except for the Lemur-M) will ship with reverse adjustable
paper guides. The Lemur-M will always have a burster and a 2.12" fixed
width paper guide. Hoppers are supplied at no charge with the cutter option, except on kiosk models. Top plates are substituted for hoppers on vertical printers. Please note that the display and cutter do not come standard on any printer model.