Desktop and kiosk ticket printers HomeAboutPrintersTicketsSalesSupportSupport

Lemur-Z with optional roll holder
Lemur-Z frontview
Lemur-Z roll holder
Lemur-Z roll holder
Lemur-Z roll holder
Lemur-Z roll holder
Lemur-Z with optional ticket paper guide
Lemur-Z with optional ticket paper guide
Lemur-Z with optional ticket paper guide
Lemur-Z center feed guide
Lemur-Z with optional base mounting plate

Printers  >  Lemur-Z

Kiosk Printer with Presenter 

The Lemur-Z kiosk printer includes a looping presenter, which can retract the media if not taken within a prescribed period. The printer can work with receipt rolls or fan folded tickets and is available with optional roll holder; Ethernet, WiFi or Bluetooth interfaces; low paper sensor; and mounting plates.

The Lemur-Z has attracted attention from kiosk manufacturers and end-users as a seamless replacement for older printer models, like Zebra’s KR403. The Lemur-Z makes a costly kiosk re-design unnecessary, as customers can easily swap-out their legacy printer for the BOCA replacement.

Typical applications
  • Self-Service
  • Kiosks

Print Method: direct thermal
Print Speed: 5” per sec. maximum
Resolution: 203 dpi (8 dots/mm)
Size: 2.6 H x 4.25 W x 5.5 L
Weight: 1.8 pounds (excluding power supply)

Media Transport
Media Type: roll or fanfold
Ticket Thickness: .002” to .007”
Ticket Width: 2.0” to 3.25”
Minimum Ticket Length: 2.75”
Positioning: optical detector senses black mark at 1.06” from ticket edge
Ticket Separation: cutter
Presenter: automatically retracts ticket/receipt if not taken by customer
Configuration: the printer is shipped with parts to support either ticket or receipt operation. The receipt configuration is shipped with an adjustable width roll holder that can be attached in 60 degree increments. An adjustable width paper guide to support fanfolded media is shipped with the ticket configuration.
Roll: inner diameter - 1.0” minimum; outer diameter - 7.0” maximum

Standard: Serial and USB
Optional: Ethernet, Bluetooth & Wi-Fi

Standard: FGL
Drivers: Windows, Mac and Linux

* Print speed may be affected at extreme tempuratures

Power Requirements
100-240 VAC, 50/60 Hz, 65W max
Amp max 24 V DC, 2.5 Amp max

*Operating Temperature: -20 to 60ºC
Relative Humidity: 10% to 90%
Storage Temperature: -40 to 70ºC above specs without condensation

Bar Codes
Most 1D and 2D codes including PDF417 DataMatrix, QR, Aztec

Full speed printing of picket fence and ladder bar codes

Resident fonts: 16 bitmapped fonts (including Cyrillic and German characters) and Asian character sets (optional)

Downloadable fonts: HP Soft font / TrueTypes fonts
Downloadable RAM: up to 27MB
Downloadable Flash: up to 12MB (optional)

FGL format, PCX format (1bit b/w),
BMP format (1bit b/w)

Web Interface (ethernet only)
Real-time status monitor
Email notification

Projected Life
Cutter: 1 million cuts
Print Head: 100 km of paper
or 100 million dot activations
Bonus: Free print head replacements when exclusively using Boca paper

Printer: 1 year, parts and labor
Print head: 90 days

Patents: BOCA has a patented head protection system that prevents premature head failure


Additional Options

  • Low paper sensor kit
  • Roll holder
  • Base mounting plate (for replacement of Zebra KR203/KR403)
  • Quick fit hubs
  • 58mm Center Guide